EAN: N/A Varenummer FAN-O-PA2-KIT Kategori

Fanvil kit med kamera (PA2)

965,00 DKK 965,00 DKK ex. moms

Pris inkl. moms 1.206,25 DKK

På lager (kan bestilles som restordre)

Beskrivelse

Fanvil PA2 KIT, med Højtaler, Mikrofon, Tastetryk og Kamera.

Bemærk, dette kit indeholder ikke selve PA2

Get an official accessory kit for your Fanvil PA2 SIP Paging Gateway & Video Intercom. This kit includes four modules: a speaker, microphone, button, and IP camera. The 5W loudspeaker and -38dB±2 microphone are waterproof and dustproof, and both come with a self-adhesive layer for simple installation.

The stainless steel button is IP67 and IK10 rated with a mechanical lifetime of 200,000 clicks. It is backlit using an LED with a lifetime of 400,000 hours. The IP camera module gives you 720p HD video. It is powered through the PA2 gateway’s LAN port. The wide-angle lens with f/1.2 aperture provides color video down to 0.1 lux.

The PA2 has various functions and interfaces such as intercom, broadcast, video, security, recording.

Fanvil PA2 SIP paging gateway Technical Specification

Intercom
Two SIP lines, supporting SIP 2.0 (RFC3261) and related RFC
Supports two lines RTSP
Voice broadcast IP address
Button or remote volume adjustment
Switch signal input and output
Talkback recording output
Handsfree talking
Default auto answer
Dynamic multicast function
Supports DC or POE power supply
Support for Function key interface
Support monophonic active speakers
Network time synchronization
Action URL / Active URI remote control
Supports SRTP
Support for HTTP / HTTPS web pages
Support Qos: 802.1p / q, DSCP
Support MD5 authentication
Supports Web Filter
DHCP / static / PPPoE
STUN

Physical Specifications
2 RJ45 interface: Yellow: WAN port 10 / 100M adaptive, support POE PoE: 802.3af (Class 3: 6.49 ~ 12.95W) Black: LAN port (Only connected to the original camera) Cable: Super five lines or better
1 blue indicator (SIP status and network status)
2 volume plus or minus key
1 restore factory settings key
1 recording output interface: 3.5mm standard audio interface 15 Ohm impedance
1 ground screw
1 way passive speaker interface: Output power: 4Ω, POE / 10W, 12V / 10W,18V / 20W, 24V / 30W; related to supply voltage. Wire diameter: 18 AWG or larger diameter, Interface:Pluggable terminal block
1 headset speaker: Output: 32 Ohm 1.2V interface:Pluggable terminal block
1 DSS key interface (4 lines): Indicator: Output 5.0V 5mA Interface:pluggable terminal block
1 way microphone input interface: Recommendation: Use an electret condenser microphone Sensitivity: -38dB, Impedance 2.2 K Ohm bias voltage 2.2V Interface:Pluggable terminal block
1 short circuit input and output interface (built-in relay): Relay: MAX DC30V / 1A, AC125V / 0.5A, Interface:pluggable terminal block
2 parallel power input interface: 12V-24V / 2A DC 1 road for the 5.5mm DC power seat 1 road way 2Pin pluggable terminal block
Standby power consumption: DC12V 1.32W / POE 1.78W
Housing material: aluminum alloy shell
Installation: Indoor installation
Operating temperature: -30 ~ 70 ℃
Storage temperature: -40 ~ 70 ℃
Relative humidity: 10% – 95%
Equipment size: 113x83x28mm
Packing size: 138x108x77mm
Equipment weight: 250g

Audio
Narrowband speech coding: G.711a / u, G.723.1, G.726-32K, G.729AB
Broadband speech coding: G.722
Half Duplex Echo Cancellation (AEC)
DTMF: In-band, out-of-band DTMF (RFC2833) / SIP Info

Networking Protocols
Supports PoE (802.3af
Primary and secondary DNS servers are supported
Support VLAN
Supports SNTP client
Support VPN L2TP / PPTP / IPSec

Læs mere >her<

Yderligere information

Fabrikant

Fanvil

Problemer med at finde det rette udstyr?

Ring til os på 66 18 11 68, så guider vi dig med glæde igennem dit køb.